Colorado Springs

Colorado Springs Air Conditioning & Heating: Service, Repair, and Equipment Contractors

This local page provides resources and information about A/C and heating service, repair, maintenance, and installers in Colorado Springs, CO. This information includes featured HVAC contractors plus a link to our handy printable grid to compare price quotes. Here you will also find sources of energy efficiency and equipment rebates, the ratio of hours of cooling and heating needed each year and more.

About HVAC contractors

The contractor you choose will make a big impact on your satisfaction and purchase of a new air conditioning and heating system. Why? They determine the size and type of equipment for your situation and they control the quality of the installation. If you have not yet seen them, in the top navigation menu on this page you will find quick tips and expanded topics on two essential topics: how to select the right HVAC contractor and how to buy a new heating and cooling system.

Most air conditioning and heating contractors stock and install a limited number of equipment brands. Some independent contractors will order and install any brand of new equipment you prefer to buy. Most of these service companies will perform repair and maintenance on all brands of central heaters, furnaces and air conditioners.

In addition to heating and cooling for indoor comfort and energy savings, many HVAC companies perform air quality work such as air filters, dehumidifiers and humidifiers, ventilation and prevention of toxic carbon monoxide gas from your furnace. However, not all of these perform energy efficiency improvements to houses or buildings. If the service company you select does not perform conservation improvements on homes or buildings, they should be able to recommend another Colorado Springs company who does.

How to compare air conditioning and heating equipment price quotes

Air conditioning and heating systems are made of components or units, and these can be mixed and matched to yield many possible combinations of performance and efficiency. Additionally, based on the particular situation in your home or building, these components must be chosen and installed to accommodate them. Installing identical equipment, two different companies can produce drastically different results. For these reasons, comparing proposals, features, and prices can be more than confusing.

To help you sort through your options, use our free and printer-friendly cost comparison organizer found in the navigation on the top of this page. If you get multiple price quotes, it will save you a lot of time and headaches. This grid allows you to compare the essential features from contractor bids including: main components; equipment efficiency in SEER and AFUE; manufacturer’s and installer’s warranties; and equipment brand.

How the area climate and resources affect your HVAC needs and decisions

Colorado Springs holds a special place in the history of electrical experiments. In 1899 and 1900, Nicolai Tesla performed some of his pioneering work with high voltage electricity in an experimental station here. The fact that electricity now powers most of our heating, cooling, and computers makes this a notable historical fact.

On the heating and cooling map of the U.S. with 5 zones, Colorado Springs lies in cooling zone 1 and heating zone 1. These require approximately 584 cooling hours and 4626 heating degree-days per year. As a general and relative guide, the average home here would need 7.9 times more heating than air conditioning over a calendar year. Keep in mind that Colorado Springs is located near the border of two zones. Differences in elevation or other topographical or climatic influences can cause microclimates, so be sure to rely on actual measurements and calculations from your heating and air conditioning contractor.

The dry and sunny climate here, with its plentiful warming from the sun, brings days in which home heating and cooling may not be necessary. However, on these same days, a humidifier, whole house air filter or fresh air ventilation could make a huge difference in your comfort and well being.

Pollen, allergies and air filters in Colorado Springs

In the Colorado Springs area, home air filtration is a necessity to some residents. Certain Rocky Mountain plants and trees can strongly influence what type of air filter you and your A/C system need. A couple of examples include ash, birch, cedar/juniper, aspen and cottonwood trees, ragweed in the fall, and other types of allergy producing wildflower pollen in the springtime. The daily pollen count and allergy forecast for the area can be found here.

Local utility and conservation providers

Colorado Springs Utilities and the other resources shown on the DSIRE database here offer energy efficiency rebates and incentives from time to time. In many cases, your A/C and heating contractor can coordinate all available energy conservation and rebate programs, from federal tax credits to local rebates and state incentives.

The availability of natural gas or other primary fuels such as heating oil can determine which HVAC equipment will give you the best combination of comfort and lower heating utility bills. Since primary fuels are available in this area, many consumers have chosen gas central furnaces rather than heat pumps. If natural gas prices climb faster than electricity rates, this trend might change. In situations where a heat pump makes the best choice, some of the factors that affect air source heat pumps include the average daily temperature, fluctuations in temperature, and humidity. Other local conditions such as rock outcrops located close to the surface may limit the use of some types of ground source heat pumps.

How a whole house approach includes the “envelope” in the load calculation

If you plan to get price quotes to buy a new A/C and heating system, look for contractors who will insert the heating and cooling demands of the Colorado Springs climate along with the size and condition of your home or building “envelope” into a complex, but critical load calculation. For many reasons, a rule of thumb load calculation based only on square footage or using the same size system as the old one without verification should be avoided. This calculation requires considerable expertise or software and interpretation.

Resources for HVAC technical or vocational training in or near Colorado Springs

If you are interested in learning more about the technical aspects of air conditioning and heating in the Colorado Springs area, such as courses to get a Colorado HVAC license, here are some local or regional links:

Emily Griffith Opportunity School
1250 Welton Street
Denver, CO 80204
Phone:(720) 423-4834

Red Rocks Community College
13300 W 6th Ave
Lakewood, CO 80228-1255
Phone:(303) 914-6600

ASHRAE Rocky Mountain Chapter: Acronym for American Society of Heating, Refrigerating and Air-Conditioning Engineers.