Tag Archives: ac equipment cost

Comparison of repair vs. replace A/C and heating calculators

In this post, we compare three calculators or decision tools for the cost of replacing vs. repairing your HVAC equipment. Since the approach of each of these resources is different, you might try two or three of them to get a broader perspective of costs.

In projections such as these, there is no way to avoid variables in the future, such as repair bills resulting from keeping an older HVAC system going, the price of fuels or utilities, and how hot or cold it’s going to be over time. Therefore, any calculator must make assumptions, standardize or have you project some of the variables.

A quick bit of advice on browsers and online tools in general: if a tool or form such as a cost calculator does not work using one browser, before giving up, try another one. Example: if you are using Mozilla Firefox and an online tool does not seem to work correctly, copy and paste the address into Internet Explorer and see if it works there.

Energy Star Checklist
http://www.energystar.gov/index.cfm?c=heat_cool.pr_checklist_consumers

Rather than making cost projections and entering numbers in a calculator, the approach this government website takes starts with a quick question and answer format. If you have taken the time to gather 12 months of utility bills, at the bottom of the page, there is a link to calculator called the Energy Star Home Energy Yardstick.

Calculator From Service Experts
http://www.serviceexperts.com/HVAC-Tools/Energy-Savings-Calculator.aspx

In the text, it says that if your system was installed before 2000, that you might want to consider replacing it based on age and energy bill savings based on across-the-board improvements in efficiency. This tool, built within the graphics of a thermostat, has a pull down to select the state in which you live. The national average is the default. It calculates savings over 5 years.

Calculator From Aire Serv
http://www.aireserv.com/Ask-the-Expert/Repair-vs-Replacement

This calculator displays one field at a time. After you enter a number in the field and click on the word “tab”, it moves to the next field and saves the previous information. There are a total of 7 fields done in 3 entries. At the end, you can change one variable and recalculate cost or savings without having to enter all data again. Assuming you have already have data such as your utility costs handy, entering the numbers only takes a few minutes.

A couple of parting thoughts
Comparison tools like the three above are merely a starting point. If you select a thorough local HVAC company, they will have actual measuring devices and more sophisticated calculations that take into account your home and its “envelope” (interface with outside air). On-site price quotes for new systems are generally no cost. Also, some utility companies sponsor free energy audits. If you live in one of the cities in the right column of our website home page, on that page there will be a link to some of these programs.

Prices for A/C and heating repair labor, parts and utilities tend to go up rather than down. If using historical numbers, where this has not been factored in, keep it in mind.